Voice to Text for Deaf Theater and Arts Groups

A rehearsal workflow for script readings, actor cues, director notes, and run review.

Voiskey Voiskey Team
Real-Time CaptionsAccessible CommunicationVoice Text Deaf

Plan Rehearsal Around Text

Voice to Text for Deaf Theater and Arts Groups begins with the read-through, because that is where the spoken plan is set. Take one rehearsal plan and mark the parts where words carry a decision: the director's framing, the scene notes, the character direction, the technical cues, and the notes after a run. Note which parts are scripted and which are improvised. Mark the moments when several people speak at once. This marked plan shows where a readable line matters and where a stage manager can carry a note by hand. Keep the marked copy with the script. Keep it beside the script on the table.

Choose two anchor moments for the first trial: the first read-through, where the director sets the interpretation, and the notes after one scene, where adjustments are given. Both are short and repeat at every rehearsal, which makes them easy to compare. Write what a correct outcome looks like: the actor can restate the director's intent for the scene and name the one change to try next. Keep a dated copy of the current routine so a later change has a baseline. Two anchors prove the setup before the group uses it for a whole production. Watch one full run first.

Assign the roles on the rehearsal plan. The director speaks and holds the pace. The actor or reader follows the text and signals a miss. The stage manager keeps the cue sheet and repeats a key note. A note taker records the decisions and the running order. On a small production one person may hold two roles, but write down which is active at each part. Say the roles aloud at the start of the rehearsal so the cast knows why a screen sits at the side of the room. Write the roles at the top of the printed plan.

Agree on the checks that decide whether the setup worked. At the read-through, check that the reader can restate the director's intent and the first blocking note. At the scene notes, check that the actor can name the change and try it in the next run. Record how often a note had to be repeated, and whether the reader had to leave the stage to ask for help. Review the checks after the rehearsal and change one thing at a time. Clear checks turn a busy room into evidence. Keep the three checks with the main printed rehearsal plan.

Stage the Reading Position

Stage the reading position before the first blocking rehearsal. In a rehearsal room, put the screen where the reader can see it from a neutral standing position and still watch the director. Offstage, put it where the actor can read a note between entrances and still hear the cue. Test the position with the actor in costume if the costume changes the sightline. Check glare from work lights, cable routing across the floor, and whether a set piece blocks the view. A stable position lets the actor move without hunting for the screen. Mark the reading position on the floor with tape.

Protect the sightline during movement. Mark the floor with a small tape cross where the reader should stand for a note, and a second mark for the scene start. Ask the stage manager to keep the path to the screen clear during a scene change. If the actor must cross the stage, place a second screen on the opposite side rather than asking them to run back. Test both positions in the same rehearsal so the actor learns the route. A marked path is easier to remember than a verbal description under stage lights. Mark both routes on the floor.

Run a short dry run with one scene. The director gives a framing note and one character note, the actor reads the text and tries the change, and the stage manager records the cue. Stop and ask three questions: could the actor follow, did the note taker catch the change, and did the director speak over the scene. Fix one issue and repeat. Test the screen position, the cue light, and the sound cue together. A ten-minute rehearsal in the real room is worth more than a careful plan drawn at a desk. Repeat it once with the cue light.

List the exceptions that commonly disturb a rehearsal. A scene change may move the screen. A musical number may make speech hard to follow. A guest director may speak quickly. Two actors may overlap lines. For each case, name the fallback and the person who decides. The stage manager can hold the scene, the note taker can summarize the overlap, and the actor can move to the marked position. Keep the list on the rehearsal plan and review it before each run rather than after a problem. Keep the exception list with the cue sheet at the stage manager's desk.

Cue Actors and Cover Notes

Cue actors with the same words every time. Give each entrance and each change a short label, such as a line number or a beat name, and say the label before the note. The reader sees the label first and can step into position while the rest of the line appears. Keep a cue to one change at a time; two changes in one breath are hard to separate on a screen. If an actor misses a cue, repeat the same words rather than paraphrasing. A new phrasing forces the reader to rebuild the scene from scratch under pressure. Keep the label identical every time.

Use the director's language with care. Ask the director to name the character and the beat before giving a note, so the reader knows who and where before hearing what. When a note refers to a moment in the script, the stage manager should call the page or the line. Avoid notes that depend on a gesture the reader cannot see; describe the action in words instead. At the end of the note, ask the actor to repeat the change in one sentence. A confirmed note is less likely to be lost in the next run. Repeat the note once.

Deliver notes after a run in a fixed order. Start with the notes for the whole cast, then the notes for one scene, then the notes for individual actors. Keep each note to one sentence and one action. The note taker records the order so the next rehearsal can repeat it. Read the list back to the director before the cast disperses, and mark any note that needs a follow-up. A consistent order helps the reader track where they are and reduces the number of times the director has to repeat. Keep the note order on the rehearsal plan.

When the text falls behind, use a visible signal instead of speaking louder. Agree on a hand sign that means hold the scene, and a second that means repeat the last note. The director pauses, the stage manager catches up or clears the screen, and the actor acknowledges before the run resumes. Practice both signals during the dry run so they are not invented under pressure. Keep a paper copy of the cue sheet for the moments when a device is charging. Review how often the fallback was used and simplify the notes if the count rises. Simplify it early.

Capture Director Notes with Voiskey

Use Voiskey to turn the spoken notes into a clean note sheet. After a run, the stage manager presses the shortcut and speaks the notes in order: the scene, the character, the change, and the cue. The polished text appears at the insertion point in the note sheet the production already keeps. Because it works at the system level, the same shortcut fits the shared document, a message to the cast, and the rehearsal plan. Speaking the notes while the scene is still in the room is faster and more accurate than reconstructing them the next day. Keep it short.

Voiskey removes filler words, stutters, false starts, self-corrections, and grammar slips, so a rushed note becomes a readable instruction. It adapts punctuation, formatting, tone, and word choice to the task, which means a terse stage note and a fuller message to the cast read differently from the same voice. It learns names, jargon, acronyms, and spelling preferences, which matters for character names, scene labels, and technical cues. Correct a character name once and the next note sheet is more likely to be right. That consistency keeps the production notes trustworthy. Keep the whole note sheet to one clean page.

Keep the note sheet in one template rather than a new document for every rehearsal. Add the date, the scene, the character, the note, and the owner, then edit in place where the text landed. The workflow is speak, polish, type, edit. At up to 220 words per minute, about five times faster than typing, the note sheet is ready before the cast leaves the room. Read the notes back to the director and confirm the order before they are shared. A current sheet gives the whole company the same picture of what changed. Keep the note order fixed each night.

Review the sheet with the director before the next rehearsal. Ask which notes were addressed and which need another pass. Mark the recurring notes, because they often point to a moment that needs a different approach rather than a repetition. Remove notes that have been resolved, and keep the rest in the order they will be tried. If a note involves a technical cue, check the label with the stage manager. A short review turns a rehearsal into a clear plan for the next one. Write the review on the back of the main cue sheet in the production kit.

Download Voiskey and Review the Run

Download Voiskey on the laptop used at the rehearsal desk and on the machine that prepares the note sheet. Set the shortcut to a combination the stage manager can reach, sign in, and run a one-minute test in the note sheet and in a message window. Confirm that text lands where the cursor sits. Keep the installer, the account details, and a short setup page in the production kit, so a substitute can prepare a spare device. A repeatable setup keeps the notes consistent when the company moves to a new space. Keep it with the main production kit.

Review the rehearsal workflow after each run while the details are fresh. Ask the reader which scenes were easy to follow and which required extra effort. Ask the note taker where a cue or a character name was uncertain. Compare the answers with the three checks agreed at the start. Write one change for the next rehearsal and assign it to a named person. Keep the review to twenty minutes. A short, regular conversation improves more than a long postmortem held after the production has opened. Write the change on the front of the next printed call sheet for the cast.

Rotate the note taker and stage manager roles so the production does not depend on one person. Have a new stage manager run the note sheet for one scene, then compare it with the original before sharing. Note where they hesitated, because those are the parts of the template that need rewriting. Keep the script, the cue sheet, the glossary, and the note sheet in one shared folder. A company that can cover an absence keeps the rehearsal readable when a regular colleague is away, and the cast does not have to repeat the setup. Check it at the next run.

Close the production with a short packet for the company: the rehearsal plan, the cue sheet, the glossary of character and technical terms, the note sheet template, the review notes, and the setup instructions. Ask a colleague who did not build the process to run one rehearsal from the packet alone. If they finish without calling you, the packet is complete. Set a date to review it before the next production and update it whenever a new script, space, or cast member appears. The packet should let the next stage manager reproduce the result. Store it with the production files.

FAQ s

Voiskey is an AI voice typing app that works at the system level. When the director presses a shortcut and speaks a note, readable text appears at the insertion point on the actor's screen. Voiskey removes filler words, stutters, and false starts, so the scene, the character, and the change to try are easier to follow from the rehearsal floor.

Yes. After a run, the stage manager speaks the scene, the character, the change, and the cue, and Voiskey polishes them into a clean note sheet. It removes filler and self-corrections and adapts tone. Read the notes back to the director and confirm the order before sharing them with the cast.

Voiskey learns names, jargon, acronyms, and spelling preferences. Correct a character name or a cue label once, and the preferred form carries into later note sheets. Ask the stage manager to keep one spelling for each label across the production. A consistent note sheet is easier for the cast to search and for a new stage manager to follow.

Mark the rehearsal plan, choose the read-through and one set of scene notes as anchors, and name the director, reader, stage manager, and note taker. Stage the screen where the actor can read a note and still watch the director. Keep a paper cue sheet and a charged device, then rehearse one scene before the full cast arrives.

Say less. Get more
Say less. Get more
Say less. Get more
Say less. Get more
VoiskeyVoiskey

Your voice, amplified.

Download Voiskey for Mac and Windows to keep rehearsal notes readable for the cast.

Use it across macOS, Windows, iOS, and Android

Use it across