A spoken method for asking about code, testing the answer, and logging what you learn.

Voice Prompts for Code explanation work best when the prompt describes what you already understand. Choose one function, module, or configuration block, then say the language, the framework version, and the part that confuses you. Name the inputs, the outputs, and any side effect you have noticed. If you can run the code, say what happened when you tried. This short brief gives the assistant a target and stops it from producing a general lecture about the language. Speak the file name and the function name so the answer stays anchored. A vague request such as explain this code usually returns a summary you could have written yourself.
Paste the code or the smallest excerpt that still runs. If the file is long, give the function plus the definitions it calls, and say which parts you omitted. Remove anything that cannot be shared and replace required values with placeholders. Ask for the explanation to refer to line numbers or function names rather than quoting the whole block back. When the code depends on a library, name the version, because the same call can behave differently across releases. A clean excerpt produces a focused answer, while a whole repository produces a tour that touches everything and settles nothing. Name one question you want answered so the excerpt has a job.
State your level honestly. Say whether you are new to the language, familiar with the syntax but not the framework, or reviewing code outside your specialty. Ask for explanations at that level and name the concepts you already know so they can be used as comparisons. A beginner needs the shape of the program before the details; an experienced engineer needs the non-obvious decision and the trade-off. If you ask for both at once, you get a document that serves neither. Ask for one sentence at the start that says what the code does, then the explanation. That sentence becomes the standard the rest of the answer must meet.
Define what a good explanation must include: purpose, inputs and outputs, control flow, error handling, and one example of a value moving through the code. Ask for assumptions to be labeled, especially when the code depends on configuration or caller behavior you have not shown. Require the answer to mark anything it cannot verify from the excerpt. This last rule is the most important, because a confident guess about unseen code is worse than a stated gap. Write these five items in the prompt and check them off when the response arrives. Explanations that satisfy a fixed list are easier to compare across files.
Ask for three layers in a fixed order: shape, flow, and detail. Shape is one paragraph on what the code is for and where it sits in the system. Flow is a numbered walk through the main path. Detail is the line-level explanation of the parts that are unusual. This order lets you stop as soon as you have enough. Most of the time the shape and flow answer the question, and the detail layer adds cost without adding understanding. Say explicitly that the detail layer should cover only the non-obvious lines, not every assignment. Ask for the detail layer to be skipped when the flow already answers the question.
Use a worked example as the second request. Say a concrete input, ask what the code returns, and ask for the intermediate values at each step. A trace makes abstract logic visible, especially with loops, recursion, and asynchronous calls. Choose an input that exercises a boundary of the logic, such as an empty list or a duplicate key. Ask for the trace to show the values in a table with one row per step. Then change one value and ask what changes in the output. The second trace is usually where understanding arrives, because you have to predict before you compare.
Ask about the alternatives the author rejected. A short comparison with one or two other approaches explains why the code looks the way it does. Require the comparison to name the trade-off in concrete terms: memory, latency, readability, or maintenance. Ask which alternative would be chosen if a stated constraint changed. This question turns a description into design knowledge and is especially useful when you are learning a new codebase. Keep the comparison to three options at most; a survey of every possible approach is a different task and usually a distraction from the file in front of you.
When the explanation uses a term you do not know, stop and ask for a definition in one sentence, then continue from the same point. Do this in a separate turn so the main explanation stays intact. Ask for the term to be connected to something you already know from the code in front of you. Keep a list of these terms as you go; the list becomes the outline of what to learn next. Dictating the follow-up is faster than typing it, and a voice tool that removes filler keeps the question focused. Small, frequent questions beat one enormous request for a complete tutorial.
Turn each explanation into a check you can run. After the walkthrough, ask for a minimal experiment that would confirm or contradict the stated behavior: a print at a boundary, a unit test with one assertion, or a command with a known input. Run it before you accept the explanation. When the result differs, paste the actual output and ask for the explanation to be revised. This loop is what separates learning from reading. A claim you have tested is knowledge you can use; a claim you have only read is a sentence you can repeat. Keep the experiment small enough to run in a minute.
Ask for failure modes in the same pass. Say what happens with missing input, a slow dependency, a duplicate request, or a value at the boundary. For each failure, ask for the symptom a user or operator would see. This connects the code to the system around it and prepares you for incidents. Mark which failures the code handles explicitly and which it does not. The second list is often the most valuable part of the explanation, because it shows where the design stops. Keep it short and specific rather than a generic list of risks. Ask which failure would be hardest to notice in production.
Quiz yourself before you move on. Close the explanation and write, in your own words, what the code does and why. Then reopen the explanation and compare. Gaps in your version are the parts you did not understand, even if you nodded while reading. Ask a follow-up question about each gap. This method is uncomfortable and fast. Do it once per function while the code is still open, and you will need fewer re-readings later. Keep your written version next to the explanation so the difference stays visible. Repeat the quiz after a week and compare the two written versions.
Correct the assistant when it describes a version of the code you are not using. If the framework changed a call, say the version and paste the error. Ask for the explanation to be regenerated for that version rather than patched with a note. Version drift is the most common source of confidently wrong explanations, especially in fast-moving ecosystems. When you cannot confirm the version, ask for the answer to state the assumption at the top. A short assumption line is easy to check and prevents an hour of debugging against the wrong reference. Save the version string beside the log entry so the assumption stays visible later.
Voiskey keeps the question inside the editor where the code lives. Place the insertion point where you want the prompt, press the shortcut, and speak the explanation request; the polished text appears at the insertion point. This matters for vibe coding, where the prompt belongs next to the file rather than in a separate window. Say the file name, the function, and the layer you want, then read it back. The speak, polish, type, and edit loop turns a half-formed question into a precise one without leaving the editor. Fewer context switches means you keep the thread of the code.
Keep a learning log with three columns: what the code does, what surprised you, and what you still cannot explain. Add the file name, the date, and the version of the library. Update the log after each session while the questions are fresh. When you revisit the file, read the log before the code. The third column becomes a study list and a useful signal when the codebase is larger than your current understanding. A log of surprises is more useful than a summary of the code, because it records the difference between your expectation and the behavior. Add the date so a later change in behavior is easy to spot.
Share the log with the team and invite corrections. A senior engineer can answer three open questions in a minute and save you an hour. Ask them to mark where their answer is a convention rather than a requirement, because the difference matters when the code changes. When several people learn the same module, one shared log prevents five separate investigations of the same confusing function. Add a short note when an answer becomes obsolete, and keep the dated history rather than deleting it. Shared understanding accumulates when the record is maintained by more than one person. Ask each contributor to add one line when they correct an entry.
Before you build on an explanation, check the two or three claims that matter most to your task. Run the smallest test that would fail if the claim were wrong. Record the result beside the claim in the log. This habit is especially important in unfamiliar codebases, where a plausible explanation can hide a configuration dependency. When a claim cannot be tested, label it as unverified and ask a colleague. A verified explanation is a foundation; an unverified one is a hypothesis. Treat the difference seriously and your learning will compound across files. Review the unverified list weekly and promote or discard each item.
Turn the explanation request into a reusable brief: code excerpt, language and version, your level, the three layers, the trace request, the failure modes, and the verification step. Save it as a template and change only the excerpt and the specific question. A fixed brief keeps explanations comparable and stops you from forgetting the verification step when you are in a hurry. Test the brief on a function you already understand and check that the answer matches your knowledge. If it does not, the brief is not specific enough yet. Then run it once on an unfamiliar file and check that the layers arrive in order.
Voiskey turns spoken requests into AI-ready prompts, including file names, paths, and commands, which helps when the prompt must reference a specific file. Say the path slowly and repeat the ambiguous segments, such as src and lib. Check the path in the polished text before you send it, because a wrong directory sends the assistant looking at the wrong module. Keep a short list of the paths you use most in the brief. Accurate references save a round of clarification and keep the explanation tied to the code you are actually reading. Put the most common path in the brief once, not in every prompt you dictate.
Voiskey supports more than one hundred languages and translation, so you can ask about code in the language you think in and request the explanation in another language for a teammate. Keep identifiers, keywords, and error messages in their original form; translation should apply to the explanation, not the code. Ask for a note when a translated term could be confused with a language keyword. Review the translated explanation with the person who will use it. This is useful for onboarding across regions without forcing everyone to read documentation in a second language. Keep the original explanation beside the translation for the reviewer.
Download Voiskey for Mac and Windows and try the brief on the next file you open. Put the cursor in your code editor, speak the excerpt reference, the version, and the three layers, then run one verification step before you move on. Save the brief and the log entry together. Do this for three files in a week and compare the entries: the gaps you record will point to the concept worth learning next. The goal is not to read more explanations but to need fewer of them for the same kind of code. The brief and the log are the deliverable, not the answer itself.
Voiskey works at the system level: press a shortcut, speak, and the text appears at the insertion point in any app or text field. In your code editor you can place the insertion point where the prompt belongs, speak the request, and get polished text with filler words, stutters, and false starts removed.
Yes. Voiskey turns spoken requests into AI-ready prompts, including file names, paths, and commands. Say the path slowly, then check it in the polished text before sending. The app places the request at your insertion point, so the prompt stays beside the code you are reading.
Voiskey learns names, jargon, acronyms, and spelling preferences. Library names, API terms, and internal identifiers stay consistent as you dictate, which matters when a single wrong character sends the question to the wrong module. Say the term once and reuse the brief, and the app keeps your spelling.
Voiskey supports more than one hundred languages and translation. You can dictate the explanation request in one language and ask for the answer in another, keeping code identifiers unchanged. Review the translated explanation with the teammate who will use it, because a translated term can be mistaken for a keyword.

Download Voiskey for Mac and Windows and speak your next code explanation prompt.
Use it across macOS, Windows, iOS, and Android