Arrange one screen so two people can follow the same spoken words.

Setting Up a Shared screen for conversation is mostly about removing small obstacles before anyone speaks. Choose the screen, the window, and the seat first, then leave them alone for the rest of the conversation. A stable layout lets the reader build a habit of where to look, and it lets the speaker keep eye contact instead of adjusting hardware. Walk through the setup once with the person who will read the text. Ask what they want changed, not whether the setup is fine. A good setup is boring: it disappears into the conversation and leaves the words in view.
Choose the screen by size and stability. A laptop works for two people sitting close together, but a separate display gives more room for large text and keeps the laptop keyboard available for typing. If the room has a monitor, place it at the side of the table where the reader sits. Check the resolution before the conversation; text that looks crisp from the producer's position may be soft from across the table. Avoid a screen with a glossy finish if a window is behind the reader, because reflections can wash out the line. The best screen is the one the reader can see without moving their head.
Choose one window and make it obvious. Open the notes app or message window the pair already uses, create a fresh document, and put a short title at the top with the date and the topic. Leave the cursor at the insertion point so new text appears in a predictable place. Do not switch between several windows during the conversation, because each switch costs the reader a moment of orientation. If you need a second window for a reference page, place it beside the main one rather than on top of it. The reader should always know where the live line is.
Remove distractions before the first sentence. Close unrelated windows, hide the notification area, and silence the device. If a video call is running, hide participant thumbnails that cover the text and turn off any overlay that shows a timer or a toolbar. Put the device in a mode that does not dim the screen during a long conversation. Keep a charger within reach if the battery is low. These steps take two minutes and prevent the most common mid-conversation interruption, which is a banner sliding over the line the reader is following. A clean screen is part of the setup, not an optional extra.
Sit at a slight angle rather than directly opposite. The reader should be able to see the screen and the speaker's face without turning more than a little. Place the screen between the two people, closer to the reader than to the speaker, and tilt it so the surface faces the reader's eyes rather than the ceiling. If the speaker sits behind the screen, the reader has to choose between the face and the text. If the reader sits behind the screen, the speaker cannot see when the text has been read. The arrangement should let both people glance at the same surface.
Set the distance and the height with the reader's comfort in mind. A screen that is too far away forces the reader to lean forward; a screen that is too close makes the line hard to scan. Raise the display so the top of the text sits near eye level and the neck stays neutral. If the reader wears glasses, test the distance with the glasses on. Ask them to read one full line without moving their head; if they move, adjust the height or the distance. Small corrections at the start prevent a conversation spent shifting in the chair.
Control the light. Put the window behind the reader rather than behind the screen, so the display is not competing with a bright background. Turn off lamps that reflect directly into the surface, and angle a desk lamp toward the wall if the room needs more light. In a bright room, raise the screen brightness and avoid a dark theme, because thin light text on a dark field is hard to scan across a table. Ask the reader to look away and back at the screen; if their eyes need a moment to adjust, change the light rather than the words.
Plan the seating for more than two people. Seat the reader where the screen and the speakers are both visible, usually at a corner rather than at the head of the table. Keep the screen on the long side and ask people to speak toward the reader rather than toward the person they are answering. Mark the reader's chair so it does not move during the meeting. If the group is large, move the chairs closer rather than turning up the volume, because a louder voice does not fix a distant screen. Late arrivals should take seats that keep the sight line open.
Run a test before the real conversation begins. Ask the speaker to say one sentence that contains a person's name, a number, and a familiar term, and watch the text appear in the window. Then ask the reader to read the line aloud from their seat. If they pause to find the start of the line or lean forward, the setup needs an adjustment. The test should use the actual app and the actual screen, not a sample on a different device. A two-minute test catches the problems that would otherwise appear in the middle of the first important point.
Ask the reader to repeat the sentence back in their own words. This tests understanding rather than simple visibility. A reader can see every word and still miss the meaning if the line arrived in fragments or if a name was wrong. If the repeat is inaccurate, check the text first, then check the distance, then check the reader's position. Do not assume the problem is the reader's attention. The setup exists to make the words easy to follow, and the repeat is the clearest evidence that it is working. A confident repeat is a better signal than a nod.
Adjust one variable at a time. Change the text size first, then the distance, then the screen angle, and then the light. If you change several things at once, you will not know which change helped. After each adjustment, repeat the same test sentence and compare the result. Keep a note of the setting that worked, including the font size, the window width, and the reader's seat. This makes the next setup faster and gives a substitute a clear starting point. A methodical test is more useful than a long series of guesses. Write each change on the card as you make it.
Record the settings and the test result on a setup card. Write the screen type, the window, the text size, the distance, the angle, and the light condition. Add the name of the reader and the date of the test. If the conversation moves to a different room, the card tells you what to reproduce and what to check first. If the same reader uses the same room every week, the card becomes a quick checklist rather than a full rehearsal. The record is also useful when someone asks why a particular size or seat was chosen. Keep the card with the screen so it is never misplaced.
Write a one-page setup card that a substitute can follow. Include the screen, the window, the text size, the seat, the angle, the light setting, and the test sentence. Add the reader's preferences and any terms that need special care. Keep the card with the device or in a shared note that the team can open quickly. When someone covers for a regular producer, walk through the card once and watch them run the test. A setup that lives only in one person's memory disappears when that person is away, and the reader pays the cost of relearning it.
Name a backup host before the conversation. The backup should know where the window is, how to share it, and how to run the test sentence. Give them the card and a minute of practice with the reader. If the main host loses their connection, the backup takes over without changing the layout or the position of the text. The reader should not have to explain the setup again. A practiced handover keeps the readable line continuous and protects the conversation from the interruption that a change of host usually causes. The backup should also know the reader's preferred pace.
Check the setup every week. Open the usual window, speak a test sentence with a name and a number, and confirm the reader can follow it from their normal seat. Check the text size, the angle, and the light, especially after furniture moves or the season changes. Update the card with any change and remove settings that no longer help. Ask one specific question, such as which conversation this week was hardest to follow. A five-minute check prevents the slow drift that turns a good setup into a frustrating one without anyone noticing. Put the check on the calendar so it is not forgotten.
Bring new people into the routine deliberately. Have them read the card, watch one setup, and run one test with the reader before their first real conversation. Ask them to download Voiskey on the device they will use and practice the shortcut until it is automatic. Pair them with an experienced host for a full session, then let them lead while the experienced host watches. Review the setup with the reader after each new person joins, because a new habit can disturb a layout that was working. A routine that can be taught is a routine that can survive growth.
Voiskey is an AI voice typing app for computers. The speaker presses a shortcut and talks, and the words appear as text at the insertion point in the window you place between the two people. The same setup works in the notes app or message window already used for the conversation.
Voiskey removes filler words, stutters, false starts, self-corrections, and grammar slips, so a test sentence arrives as a clean line. It also adapts punctuation and formatting to the task. The test still matters: ask the reader to read the line from their seat and repeat it back before the real conversation begins.
Yes. Voiskey works at the system level, so you press a shortcut, speak, and text appears at the insertion point in any app or text field. The pair can keep the notes window they already project or share, with the same title, insertion point, and text size described in this guide.
Voiskey learns names, jargon, acronyms, and spelling preferences. A name that is corrected during the test is more likely to arrive as intended later in the conversation. Keep the three-step repair habit for unusual names, and add recurring names to the setup card so a substitute host starts with the same reference.

Download Voiskey for Mac and Windows to make your shared conversation screen readable.
Use it across macOS, Windows, iOS, and Android