Dictating Settlement Agreements

Map clauses, fix defined terms, and dictate settlement terms in a defensible order.

Voiskey Voiskey Team
Legal DictationLegal DraftingDictating Settlement Agreements

Turn Deal Terms Into a Clause Map

Dictating Settlement Agreements begins with a clause map, not a microphone. Before you speak, translate the deal into the agreement's required parts: parties, recitals, definitions, payment terms, releases, ongoing obligations, representations, and signature blocks. For each part, write one line describing what the deal requires and who confirmed it. Mark which terms are already agreed and which remain open. A settlement is often drafted under time pressure after a mediation, so the map prevents a smooth-sounding draft from omitting a term the parties bargained for. Ask the client and the other side's counsel to confirm the term list before dictation. The map becomes your speaking order and your completeness check at the same time.

Set the order of the document before drafting. Most settlement agreements follow a familiar sequence: identification of the parties, background recitals, defined terms, the settlement payment or performance, mutual releases, ongoing obligations, and general provisions. Follow the firm's standard form unless the deal requires a change, and note the change in the map. Decide where deal-specific clauses go so the reader can find them. If the agreement incorporates exhibits, list them and their labels now. Read the clause order aloud once and check that the sequence tells a coherent story from dispute to resolution. A settled order lets you dictate each section without stopping to decide what comes next, which is exactly the condition that makes voice drafting reliable.

Identify the decisions that need approval before they are spoken. Settlement authority, payment timing, release scope, and any ongoing obligation usually require a client decision or a partner sign-off. Write each decision beside the clause that depends on it, and confirm it before dictation. If a term is still under negotiation, leave a clearly marked placeholder and a note describing the open point. Do not let a plausible phrase fill a gap that the parties have not actually agreed. This discipline matters more than speed: a dictated agreement that adds an unapproved term creates a dispute rather than ending one. The map should show, at a glance, which clauses are safe to draft and which must wait.

Prepare the working file so the spoken text lands in the right structure. Open the firm's settlement template, confirm the styles, numbering, and signature block, and place the cursor at the first drafting point. Keep the term map, the party glossary, and the list of exhibits beside the document. Decide which sections you will dictate in one session and which need a second pass after review. If two people will dictate different sections, agree on the section boundaries and the placeholder format so the pieces join cleanly. Note who reviews numbers and who reviews the release language. A prepared file removes the small interruptions that cause a dictated clause to land in the wrong section or lose its numbering.

Lock Party Names and Defined Terms

Build a glossary before you dictate a single name. Settlement agreements repeat the parties, their entities, and defined terms dozens of times, and a single inconsistent spelling can create an ambiguity about who is bound. Write the full legal name of each party, its role in the agreement, and its defined short form. Include addresses, registration details, and the exact names that appear in the underlying contracts. Note any party that is signing in a representative capacity. Read the glossary aloud once to catch names that sound alike. Keep it visible during every session. A correct glossary is the cheapest form of quality control in a settlement draft, because it protects the most repeated and most consequential words in the document.

Define terms deliberately rather than by habit. List the defined terms the agreement will use, such as the claims released, the payment, the effective date, and the parties. For each, decide where it is defined and use exactly that form thereafter. Avoid defining a term in one section and redefining it in another. If the deal uses a term from an underlying contract, carry the definition across accurately or incorporate it by reference. Check that a defined term does not accidentally include or exclude something the parties did not intend. Read the definitions section aloud as a whole, since spoken repetition exposes near-duplicates and circular definitions that look fine on the page.

Check the recitals against the operative terms. The background section sets out the dispute and the reason for settling, while the operative sections create the obligations. A recital that overstates the claims, or a release that is narrower than the recital suggests, creates a gap the parties will litigate later. Mark each recital with the operative clause it supports, and confirm that every obligation in the deal appears in both the story and the terms. If the recital refers to a document, confirm its date and title. Dictate recitals in short factual sentences, without argument or characterization. The goal is a background a court could read without needing the negotiation history, not a persuasive account.

Carry the glossary into every section. When you speak a party name, use the defined short form consistently, and use the full name in the signature block. When you speak an amount, say both the figure and the written form the agreement requires. When you speak a date, say the calendar date in full rather than a relative term such as next month. These habits matter in dictation because the tool writes exactly what you say; a rushed reference becomes a real inconsistency. Pause at the end of each section and scan for names, amounts, and dates before moving to the next. Consistency is not a stylistic preference in a settlement; it is part of what makes the agreement enforceable.

Dictate Operative Terms in Sequence

Dictate the payment or performance terms first, because they are the heart of the deal and the easiest to state precisely. Say the amount, the currency, the timing, the method, and the account or delivery point, each in its own sentence. State any conditions that must occur before payment, and state what happens if they do not. If payment is staged, speak each installment separately with its own date and amount. Then read the whole payment section back against the term map. A settlement payment clause fails when it is elegant but incomplete, so completeness beats polish at this stage. Only after the mechanics are right should you work on phrasing.

Dictate the releases and the claims they cover. State who releases whom, which claims are released, and which claims are not. If the release covers known and unknown claims, use the approved language for that scope rather than improvising. Identify the effective date of the release and any carve-outs the parties agreed. If the agreement includes mutual releases, dictate each direction separately so neither is lost in a combined sentence. Then check that the release is consistent with the recitals and with any dismissal or withdrawal the deal requires. Read the release aloud and ask whether a reader could identify exactly what is being given up. Ambiguity in a release is the most expensive kind of drafting error to fix later.

Dictate ongoing obligations in the order they will be performed. If the parties must exchange documents, dismiss a proceeding, or take down a publication, state each obligation with its owner and deadline. Use active voice so the responsible party is clear. If an obligation depends on another, say so explicitly and give the sequence. Avoid lumping several duties into one sentence with shared conditions. Where an obligation is continuing, state how long it lasts and what ends it. Read the section as a checklist and confirm that every duty in the term map appears with an owner and a date. Obligations with clear owners and deadlines are far easier to administer and to enforce.

Dictate the general provisions last, after the deal-specific clauses are settled. Cover notices, governing law, entire agreement, amendment, counterparts, and signature mechanics according to the firm's standard form. Check that the notice addresses match the party glossary and that the governing law matches the parties' agreement. Confirm that the entire agreement clause does not accidentally exclude a document the deal relies on. Read the signature blocks against the full legal names and capacities. General provisions are usually boilerplate, but they are where a mismatched address or a missing counterpart clause causes practical problems after signing. Speaking them deliberately, rather than as a rushed ending, keeps the agreement operational.

Polish the Settlement Draft for Signature

Polish the draft as a whole once every section exists. Read it from the first recital to the last signature line, checking that defined terms are consistent, amounts match, dates are coherent, and every exhibit referenced is attached. This is where Voiskey's cleanup already reduces the workload: it removes filler words, stutters, false starts, self-corrections, and grammar slips as you speak, and adapts punctuation, formatting, and tone to the document you are building. But a settlement needs a deliberate review, not just clean text. Mark any clause you dictated while uncertain and revisit it with the term map in hand. Download Voiskey for the device you draft on most and run a complete agreement through the routine before relying on it for a live deal.

Check the numbers with a second set of eyes. Read each amount aloud and compare it with the term sheet, the mediation agreement, or the client instruction. Confirm installment dates, totals, and any interest calculation. Verify that the written amount and the numeral agree, and that the currency is stated once and consistently. Check the release effective date against the payment date if the deal links them. Have a colleague who did not dictate the section repeat the figures back to you. Numeric errors in a settlement are not stylistic; they can void the agreement's central bargain or trigger a dispute about what was meant. A five-minute reading is cheap compared with a motion to enforce a mistaken term.

Review the tone and the level of detail. A settlement agreement should be plain, precise, and neutral. Remove persuasive language that belongs in a brief, and remove adjectives that characterize the other side's conduct beyond what the recitals require. Check that obligations are stated as duties rather than aspirations. Confirm that the agreement does not promise something outside the parties' authority. Read the release and payment sections aloud, since those are the clauses a reader will scrutinize first. Ask whether a party who was not in the negotiation could understand what each side must do. If a clause needs the negotiation history to make sense, rewrite it.

Complete the mechanical checks before circulation. Confirm numbering, cross-references, exhibit labels, and the table of contents if the agreement has one. Check that every cross-reference points to the section that actually contains the term. Verify page numbering and the signature block layout. Confirm that the document opens correctly and that tracked changes, if any, are visible to reviewers. Save a clean copy with a version label and a date. If you dictated across multiple sessions, read the seams where sections meet, because that is where duplicated sentences and missing transitions accumulate. A polished settlement draft should look like a single deliberate document, not a collection of dictated pieces.

Circulate, Compare Versions, and Close

Circulate the draft with a short cover note that names the open points and the deadline for comments. Ask reviewers to focus on specific sections rather than returning general impressions. Keep one master version and record every change with its author and date. When comments arrive, compare them against the term map to confirm that each change is within the deal the parties approved. If a reviewer proposes a new term, route it to the client or the negotiating lead before it enters the draft. A settlement draft that grows new terms during circulation can reopen a deal that was already closed. Version discipline is what keeps a fast dictation process from creating a slow negotiation.

Use the same tooling for revisions that you used for the first draft. Voiskey works at the system level on macOS and Windows: press a shortcut, speak, and text appears at the insertion point in the agreement you are editing. It learns the party names, defined terms, and spelling preferences in the matter, which matters when a late change adds a new entity or a new defined term. The workflow is Speak-Polish-Type-Edit, and at up to 220+ words per minute it is about five times faster than typing, so a revision pass that once took an afternoon can fit between calls. When the deal is live, download Voiskey and dictate the revisions into the master file so the version history stays in one place.

Compare versions before signature. Read the final draft against the last client-approved version and confirm that every change is authorized. Check that the exhibits attached to the signature copy are the current ones. Confirm the signature blocks, the date, and the delivery method for counterparts. If the agreement requires a witness or notarization, confirm the arrangements now rather than at signing. Send the signature copy with a short note identifying the version and the open items, if any. A settlement that is signed on the wrong version, or with an outdated exhibit, can be worse than one that is signed a day later on the right one.

Close the matter with a complete record. Save the executed agreement, the term map, the approval record, and the correspondence in one place. Note the deadlines the agreement creates and assign each to an owner. If the deal requires a payment, a dismissal, or a document exchange, calendar the dates and confirm who is responsible. Update the client with a short summary of what was agreed and what happens next. Then debrief the dictation process: which sections needed the most correction, which glossary terms were missing, and where review slowed. Feed those lessons into the template so the next settlement starts from a better map and a stronger glossary.

FAQ s

Voiskey learns names, jargon, acronyms, and spelling preferences, so repeated party names and defined terms stay stable while you dictate a settlement. It adapts punctuation, formatting, and tone to the agreement you are building. The glossary you prepare is still the source of truth, and the full legal names in the signature block deserve a deliberate check before the agreement is circulated for signature.

Yes. Voiskey learns the names and terms you use and keeps spelling consistent across sections, which helps when a settlement repeats a defined term dozens of times. You still decide where each term is defined and confirm that the release and payment clauses use it correctly. Dictate the definitions section first, then read it back as a whole before drafting the operative clauses.

Press a shortcut, speak the clause into the agreement file, and polished text appears at the insertion point. Voiskey removes filler words, stutters, false starts, self-corrections, and grammar slips and adapts punctuation and formatting to the document. Polish covers your term-by-term review against the deal map. At up to 220+ words per minute, the first pass produces a complete settlement draft that is ready for verification.

Yes. Voiskey is system-level, so text appears at the insertion point in whatever app or text field holds the agreement. You dictate directly into the template, the exhibit list, and the signature blocks rather than moving text from another tool. The workflow is Speak-Polish-Type-Edit, and revisions land in the same master file so the version history stays in one place.

Say less. Get more
Say less. Get more
Say less. Get more
Say less. Get more
VoiskeyVoiskey

Your voice, amplified.

Download Voiskey for Mac and Windows and dictate your next settlement agreement clause by clause.

Use it across macOS, Windows, iOS, and Android

Use it across